Catalog

Viewing page 1 of 1

  • 10-ga charger wire

    Quantity Needed:  1.5 feet needed

    Sku: EVM-0206-EVM-0207

    Order 10-ga charger wire 1.5 feet
  • 12v-35AH AGM Sealed BatteryCopy of EVM-0232

    This is the correct replacement for your EVMaster Vehicle system. (4 needed)
    Its ultra-safe construction and Hi-tech performance and durability ensures your team the  best combination of reliability, value and power.
    Includes metric hardware.

    Sku: EVM-0232

    Order Single AGM 12V35AH battery
  • 16-ga control wire

    Sku: EVM-0208-EVM-0214-EVM-0215-EVM-02163-EVM-0209-EVM-0212-EVM-0210

    Order 16-ga control wire
  • 250 Amp fuseEVM-0259

    This fuse is located in the center of your battery block, it connects and protects the battery pack.

    Sku: EVM-0259

    Order 250 amp fuse
  • 48 Volt ChargerEVM-0218a

    A fully automatic charger specifically rated for your EVMaster’s 48Volt AGM lead acid battery’s system.
    Provides an efficient charging protocol designed for the batteries in your EVMaster.
    Original replacement. Includes SB-50 Anderson connector and handle.
    (Part looks may vary)

    Sku: EVM-0218

    Order Charger
  • Accelerator Pedal complete (EVM-0422)Copy of DSC03021

    Includes accelerator pedal (right) with mounting base, potentiometer installed with 7 ft. lead, mounting hardware and linkage.

    Sku: EVM-0422

    Order Accelerator Pedal complete
  • Batteries Cut-Off SwitchEVM-0240

    This hi amp, heavy duty switch is the master cut-off control of your vehicle, includes an extra (spare) key.

    Sku: EVM-0240

    Order Cut-off switch
  • battery boxEVM-0431

    plastic case that holds two  U-1 batteries per side.

    Sku: EVM-0431

    Order battery box
  • Battery terminal stripPICT0154

    This part is to connect your 4 batteries into one 48 volt system.

    Sku: EVM-0205

    Order Battery terminal strip
  • Brake AssemblyEVM-0415

    This complete assembly could be mounted as a right or left part.
    You just need to attached the lever to the desired direction.
    Includes back plate, lever arm, brake shoes and hardware.
    Galvanized finish.

    Sku: EVM-0415

    Order Brake assembly
  • Brake Pedal (left) EVM-0421PICT0003

    left (brake)  pedal with mounting bracket to floor pan.
    (drilling may be required)

    Sku: EVM-0421

    Order Brake (left) pedal
  • EVM-0426G Motor sprockets comparison setsproket set 10-14tsmall

    This set of sprockets allows you and the students to perform comparison test runs to understand and confirm the difference between the gains in torque and speed using different gear ratios.
    It  includes (2) 10-tooth motor sprockets and (2)14-tooth motor sprockets; using them in combination with the original 12-tooth sprockets in your vehicle, it provides a [...]

    Sku: EVM-0426G

    Order sprocket set
  • EVMaster Assembly Manual PDF discCopy of Copy of Assembly cover 11 copyrighted

    Have you lost or misplaced the original materials?
    Get back on track with your EVMaster STEM program, here you will find all the information needed to re-start your project again and get familiar with parts and procedures, includes parts list and schematics.

    Sku: EVM-0501

    Order assembly Manual PDF
  • EVMaster Brake assembly EVM-0415

    This complete assembly could be mounted as a right or left part.
    You just need to attached the lever to the desired direction.
    Includes back plate, lever arm, brake shoes and hardware.
    Galvanized finish.

  • EVMaster Controllercontroller evm-0219

    EVM-0219
    A robust 48Volt controller with 400Amp momentary load capabilities. (non- programmable)
    Perfectly matched to your EV-Master Vehicle, will provide you with the best overall performance and efficiency.
    Original replacement.

    Sku: EVM-0219

    Order Controller
  • EVMaster’s Electric Vehicle Science PDFtable of content

    Here you will find all the basic theories behind any electric vehicle functions.
    You can follow this book while assembling your evmaster or use it as a text reference to explain how the different components interact.

    Sku: EVM-0503

    Order electric vehicle science pdf
  • Forward and Reverse Control SwitchF-R switch

    Sku: EVM-0224

    Order SPDT switch black on-off-(on)
  • Forward and Reverse Triple RelayEVM-0229-3

    Sku: EVM-0229-3

    Order Forward and Reverse Relay
  • Front wheel & tireFront wheel-tire

    This assembly includes the correct ribbed tires (15 x 6.00 x 6) mounted in a 6′” wheel- hub with 2 precision bearings.

    Sku: EVM-0419

    Order Front wheel-hub-tire assy.
  • Rear hub assembly EVM-0320Copy of DSC02159

    This is the complete E.V.Master rear hub, includes Brake drum-sproket, rear hub bearing carrier w/bearings and the wheel mounting adapter plate with lugnuts.
    This component is assembled in a lathe jig to ensure the best proper alignment of all parts.

    Sku: EVM-0320

    Order Rear Hub Assembly
  • Rear Wheel & TireRear wheel assy.

    This is the correct replacement for your EVMaster rear wheel assembly.
    The rim size, the bolt pattern, the offset dimension, and the low- drag ribbed threaded tire (16×650×8) will fit your EVMaster vehicle perfectly.

    Sku: EVM-0423

    Order Rear Wheel assy.
  • Steering spindle left EVM-0112EVM-0112

    This is the complete assembly including suspension spring and spindle-to-frame mounting bolt and safety lock-nuts. (make sure you chose the correct side)

    Sku: EVM-0112

    Order Left steering spindle
  • Steering spindle Right EVM-0113EVM-0113

    This is the complete assembly including suspension spring and spindle-to-frame mounting bolt and safety lock-nuts. (make sure you chose the correct side)

    Sku: EVM-0113

    Order Steering spindle right